Welcome Stranger to OCC!Login | Register

Apevia Iceberg ATX-IB680W Green PSU



Installing a PSU is easy, right? Well, this is one is a little different. Apevia recommends you install the Iceberg upside down if you have a windowed case, otherwise you’ll be hiding the beautiful interior and lights. This is pretty easy, just flip it over, screw in, and there you are. Although the text on the back will be upside down, it’s no biggie.

Setting it all up was a breeze. The cables were a decent length and reached my RAID array of five hard drives, my video card, and the rest of my various accessories. I must say that the squeeze tabs I mentioned earlier are very handy. Pulling apart connectors can be a pain and potentially dangerous to not only your hardware but also yourself. The UV sleeves and connectors are really a spectacle under UV light. The pictures just don’t do it justice!

A minor annoyance, but every time you start the power supply, it will default to the blue fan color. So you will have to physically change the color back to whatever setting it was on before you turned off the PSU.

Is it all just looks? Let’s move onto testing!


Model ATX-IB680W-GN
Maximum Power 680W
Fans 2
Main Connector 20+4 pin
Dual +12V Yes
SLI Support Yes
Power Good Signal 100-500ms
Hold-up Time >10ms at full load
Efficiency < 70%
Over Voltage Protection YES
Overload Protection YES
Input Voltage 115/230 V
Input Frequency Range 50/60Hz
Input Current 10A @ 115V, 5A @ 230V
Output [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]
MTBF 100,000 Hours at full load
Approvals CB IEC 950/ TUV EN 60950/ UL 1950/ CSA 950
Connectors 1 x Main Connector (20+4 pin)
1 x 12V P4 / P8 (4/8 pin)
8 x Peripheral
4 x SATA
2 x Floppy
2 x PCI Express
Features High-tech aluminum casting with fire-resistant acrylic cover
LED light switch - Fan LED lights can be switched to blue, green or red
Multi-color coated components & PC board
Excellent Ventilation Design: 2 x 80 mm crystal LED fans
User-adjustable fan speed controller optimizing balance between noise reduction and necessary cooling
Cable Management: all cables are sleeved to avoid clutter and to improve airflow
UV Sensitive On/Off Power Switch, Power Plug and connectors
Short circuit / over voltage / over current protection
Dimension 170mm x 150mm x 85mm / 6.7" x 5.9" x 3.4" (L x W x H)
Weight 5 lbs

  1. Introduction & Closer Look
  2. Installation & Specifications
  3. Testing
  4. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.0282020569   (xlweb1)