Welcome Stranger to OCC!Login | Register

Antec Easy SATA Review

gotdamojo06    -   October 28, 2009
Category: Gadgets
Price: $29.95
» Discuss this article (15)

Lowest Prices

Introduction:  

With the larger your files on your computer are getting, more storage space is being required to be installed in your system. This can be done with either an external hard drive or an internal drive. Some people are not huge fans of the external storage solution, so Antec has come up with a great solution to this problem with their Antec Easy SATA hard drive enclosure. The Antec Easy SATA enclosure is going to allow you to not only easily swap out hard drives between computers, but it is also going to allow you to easily and quickly add extra storage space to your setup while still using your SATA connections that you are used to allowing for up to 3Gbps data transfer speeds. I am very excited to see exactly how well this solution is going to work, as well as to see if it is going to handicap any performance that we are all used to with the SATA connections. So, let's take a nice and close look at the Antec Easy SATA hard drive enclosure.

 

Closer Look: 

The packaging for the Antec Easy SATA hard drive enclosure is very simple in design. It is a clear plastic package that holds everything inside of it and displays all of the information that you are going to need to know about the product on the outside of the package. The front of the packaging displays a large image of the Antec Easy SATA hard drive enclosure installed in a case with it slightly pulled out along with the hard drive slightly pulled out to display how it does get installed. Above the picture Antec gives you a nice little description of the product which is worded, "Hot Swap Hard Drive Caddy with External SATA connector." The flat flap on the top of the package displays the Antec logo with the "Believe it" slogan printed in the top left corner. To the right of that is where the Easy SATA name is printed with a little bit more of a description under that. When you take a look at the back of the packaging you are going to see the installation instructions printed at the top with sketch drawings to depict what you are going to need to do to install it. All of the features are listed on the back in multiple languages as well. Inside of the package is where you are going to find a little bag of eight screws that will allow you to install the device to your case to make sure it will not go anywhere. 

 

 

 

 

 

 

 

 

 

 

When you open up the packaging to pull the device out, you are going to be able to see that the sides and the entire device looks like a hollowed out optical drive that fits in the 5.25" drive bay with a flap in the front that is going to be able to fall inwards to allow the drive to be installed and look flush with the rest of the case when there is no drive installed. The back of the Antec Easy SATA is where you are going to see the PCB board that has the SATA connection and the SATA power connectors on either side, that are going to allow the data to transfer through, along with the power so your hard drive you have plugged in is going to be able to get the power and information from your computer. Either side of the Easy SATA device look just like a typical 5.25" device and you have all of your screw holes so that you can secure the device to the cage in your case.

 

 

 

The front of the Antec Easy SATA has two features that I want to point out, one on each side of the door that folds back when a drive is installed. On the left hand side of the door, you are going to see what looks like an eject button from a floppy drive, which is exactly what this button does, it will dis-engage the locking mechanisms that are holding your hard drive in so that you can slide it out of the enclosure. The other feature is on the right hand side of the device - it is an e-SATA connector, which will allow you to connect any other external hard drive you have through the Easy SATA device. Coming out of the back of the Easy SATA is a SATA cable that you plug directly into your motherboard. This cable is not for the drive you install inside of the enclosure, however it is the cable that tansfers the data between the motherboard and the e-SATA device you may have installed through the Easy SATA device. Also taking a look at the back of the Easy SATA device, I mentioned the PCB board that allows the hard drive you slide in to get the necessary power and transfer the data between the motherboard and the drive with a SATA cable installed between the two of them.

 

 

 

When you install the Antec Easy SATA external hard drive enclosure, you are going to see that the hard drive does hang out of the enclosure just a little bit. This is only so that you are able to grab the hard drive when you want to uninstall it. This will cause a problem with a front door that you may have on your case that covers your drive bays, plus it does take a little bit away from the overall look of your case with everything else being flush.

 

Now that we know exactly what the Antec Easy SATA device looks like, it's time to take a look at the specifications and then proceed to see what kind of performance we are going to be able to see from the device.  




  1. Introduction & Closer Look
  2. Features
  3. Testing
  4. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.1276819706