ADATA Vitesta Extreme Edition DDR2 800 Memory Review

Installation:

Memory installation is pretty simple once you get the hang of it. I want to warn you of the risk of ESD (Electro Static Discharge), which can harm your components if you are not careful. I recommend wearing an ESD Bracelet or at least touching a metal surface prior to installing to prevent blowing out any parts of your computer. To install the modules, the first and most important thing to do is make sure all power is off and disconnected. Slide back the retention clips from the old memory and carefully remove them from the motherboard. Now take the new memory modules and line them up, making sure the notch in the memory slot matches up with the groove on the memory module. Carefully press on the two ends of modules until they snap into place and the retention clips should automatically click into place. Voila! Now just plug your computer back in and turn it on.

Below you can see the final step of the install for one set (2GB) and two sets (4GB), respectively.

  <

Specifications:

Features:

• ADATA Red Aluminum Heat Spreader
• Lifetime Warranty
• RoHS Compliant
• EPP Ready
• 100% compatible with systems designed for use