Welcome Stranger to OCC!Login | Register

Arctic Cooling Freezer Pro 64 Review

Former staff writer    -   September 20, 2007
» Discuss this article (1)

Closer Look:

Inside the box the heatsink is protected by a plastic shell. There is also an additional shell which surrounds the copper base that contains the pre-applied thermal compound.

 

 

 

 

The fan is actually connected to the fan guard by a plastic bracket and the fan guard is connected to the bracket by rubber mounts which act as shock and sound vibration absorbers.

 

The copper base of the structure contains a pre-applied thermal compound and has six heat pipes for heat transfer. The mounting clip can be easily secured with one finger once it is positioned on the mounting clip.

 

 

The body of the unit is constructed of aluminum fins, which are attached to the heat pipes. The power connector has four pins; the fourth actually controlling the fan speed through the PWM signal in your motherboard's BIOS.

 

There is also an instruction manual, and if you like stickers, one is supplied for your case.




  1. Introduction & Closer Look
  2. Closer Look Continued
  3. Installation & Specifications
  4. Testing
  5. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0267970562